• Home>
• HARDWARE Items>
• Eyebolts>
• Wire Eyebolt

Wire Eyebolts with Nuts, Zinc Plated

Drop Forged Regular Eyebolts and Machinery Regular Eyebolts are plain pattern eyebolts designed for vertical lifting only. Do not use them for lifting at an angle.
      Drop Forged Shoulder Eyebolts and Machinery Shoulder Eyebolts are designed for both angled lifting—up to a maximum of 45 degrees—and vertical lifting. The shoulder of the eyebolt must be installed flush with the mounting surface. Working load limits apply to straight vertical lifts only—lifting at an angle reduces the load limit significantly.
      Wire Eyebolts are intended for tie-downs and wire guiding. Size is specified as Thread Diameter x Shank Length (measure length from under the eye to the tip). Do not use Wire Eyebolts for lifting applications.
      Wire Screw Eyes Lag Screw Threaded are intended for use with wood mounting surfaces and as general wire and strand guides. Size is specified as Thread Diameter x Shank Length (measure length from under the eye to the tip). A gimlet point allows them to start threading into wood easily. Wire Screw Eyes are not suitable for lifting applications.